Tank Divider Question

by **Irish_Lass** on Sat Apr 17, 2010 7:53 pm

For a while now I've been thinking about buying a tank for the cory' catfish and dividing the 9 gallon so I can have 2 bettas rather than 1. Is there any tank dividers out there that don't require me gluing them to the tank etc.? The only reason I don't want to glue anything is because if it doesn't work out then I'd like to revert back easily.

by **kizno1** on Sat Apr 17, 2010 7:55 pm

you camn get clip on ones from ebay
like this
[You must be registered and logged in to see this link.]
make sure you get it to go as close to the lid as possible so they cant jump it.

by **Irish_Lass** on Sat Apr 17, 2010 8:04 pm

Thanks Kiz. One of my concerns is that both my tanks are ClearSeal tanks. They come with like wee mini ledges on the front and back of the tank. I think they're going to mean that I can't divide the tank.

by **kizno1** on Sat Apr 17, 2010 8:10 pm

what ive done on my small 10g that i have endler fry in is to silicone 2 little tracks on each side of the ledges and slip the divide inbetween them. it might be a little fiddle but you could cut out a small slit on each side for the ledge to go into and then it would reach the lid so there wouldnt be much of a chance for a betta to jump it.

by **Irish_Lass** on Sat Apr 17, 2010 8:46 pm

I don't think I know what you mean kiz. I've been looking at my tank trying to figure it out but its not sinking in. My fault, not yours. Plus, the problem is that I have nowhere to house the fish so there is no option for silicone to dry out etc.

by **Haych** on Sat Apr 17, 2010 10:15 pm

You can still divide under the lip, and just lower the water level slightly to account for this - and I have divided a tank before and had easy removal of the strips even when glued

it isnt much work if you ever decide to revert back Smile

by **Irish_Lass** on Sun Apr 18, 2010 4:50 pm

Thanks Haych! I never thought about lowering the water level. Good thinking!

So my tank measures 18" x 12" x 12" but I don't really know which divider (that kiz shows above in his link) to go for.

by **Haych** on Sun Apr 18, 2010 7:25 pm

I went to a stationers and bought 3mm sliders / spine bars and went to a hobby shop and bought the plastic aidas

My aidas werent big enough so I had to stitch mine together

by **Vandraco aka Bronzecat** on Sun Apr 18, 2010 7:44 pm

There's a 12x18 inch divider from that same seller Very Happy

by **Irish_Lass** on Sun Apr 18, 2010 7:49 pm

[You must be registered and logged in to see this link.]

My tank is like this one, its measurements are below (18"x12"x12")

My confusion (because God knows its easily done!) is which measurements I should be looking at for the divider.

by **Haych** on Sun Apr 18, 2010 8:10 pm

you need back to front top to bottom

measure from the inside

by **Vandraco aka Bronzecat** on Sun Apr 18, 2010 9:29 pm

Yep^^ so it looks like the divider is going to have to be approx 12x18.

by **kizno1** on Mon Apr 19, 2010 5:12 pm

Irish_Lass wrote:I don't think I know what you mean kiz. I've been looking at my tank trying to figure it out but its not sinking in. My fault, not yours. Plus, the problem is that I have nowhere to house the fish so there is no option for silicone to dry out etc.

what i was meaning is silicon 2 lines under each of the ledges and fit the divider inbetween the 2 lines of silicon. does that make more sence? its hard to explain

by **aly_starh** on Mon Apr 19, 2010 8:16 pm

hiya, ive replied back to your pm Smile

by **Irish_Lass** on Fri Apr 23, 2010 8:51 pm

So I've just bought a divider on eBay. It should be here next week some time. Fingers crossed that it doesn't require a lot of assembling. I'm excited about the potential for another fishie!

by **kizno1** on Sat Apr 24, 2010 3:25 pm

you can take the little clips that hook on the side of and it should be stable enough with just the plastic to stay in place. there easy to put together you just slide the plastic over the sides.

by **Irish_Lass** on Sat Apr 24, 2010 7:28 pm

I'm real excited about it Kiz! Smile

by **kizno1** on Mon Apr 26, 2010 5:29 pm

is it going in the 9G with the corys? if it is it will be a little small for the corys to live on one side.

by **Irish_Lass** on Mon Apr 26, 2010 5:37 pm

Nope, the cory's are going into another tank with the rummy nose.

by **kizno1** on Mon Apr 26, 2010 5:38 pm

cool how bigs the tank? it might be worth uping the tetra if its a fair size.

Tank Divider Question

Tank Divider Question

Re: Tank Divider Question

Re: Tank Divider Question

Re: Tank Divider Question

Re: Tank Divider Question

Re: Tank Divider Question

Re: Tank Divider Question

Re: Tank Divider Question

Re: Tank Divider Question

Re: Tank Divider Question

Re: Tank Divider Question

Re: Tank Divider Question

Re: Tank Divider Question

Re: Tank Divider Question

Re: Tank Divider Question

Re: Tank Divider Question

Re: Tank Divider Question

Re: Tank Divider Question

Re: Tank Divider Question

Re: Tank Divider Question